Set MIDI ports with Standalone Application #
If you use the Standalone Application, click “Roland JP-80×0 Editor [1]” from top bar and choose Preferences [2]. This will open Preferences dialog [3] where you can set MIDI Input Device and MIDI Output Device.
On Windows machines, the same dialog can be opened from File menu.
JP-80×0 Editor User Manual – Setting MIDI Ports
Remote Keyboard Input #
If you have an external MIDI controller you want to use with the Editor to trigger notes and tweak knobs with, you can select MIDI IN from the Editor top bar. This port won’t work with the synth itself and is only used for triggering MIDI events.
Remote Keyboard Input available in Standalone App only!
This port is only visible with Standalone Application.
NOTE: Audio Device Settings in the preferences dialog does not have capability to transmit audio in this stage. Choose Audio Drivers, but keep in mind that audio has to go through Audio Jacks to console or sound card inputs.
Set MIDI ports with the Plug-in #
Select MIDI IN [1], where your JP MIDI Out is connected in at.
Select MIDI OUT [2] port which will send data to your JP MIDI Input.
JP-80×0 Editor User Manual – Plug-in MIDI Ports
Hardware Check / Ping #
After setting MIDI OUT, our Editor will start scanning for the hardware. If there is no immediate response, the Editor will attempt 3 more times. If there is no response, you might get a “Connection Timed Out” message. If so, double check your hardware settings and make sure your cables are good!
NOTE: MIDI ports for plug-in are set from the main window while Standalone Application MIDI ports are set from the Editor Preferences.
Editor Control Display will say “Editor is ready to go!” when response is received from the JP.
JP-80×0 Editor User Manual – Ready to go!
You can optionally enable Device ID probing function, which will check for the Device ID for you. This is good IF you have only one JP model in your setup. Function can be enabled from Utilities [1] menu -> Editor Preferences [2] -> Enable DeviceID Scanning [3].
JP-80×0 Editor User Manual – DeviceID Scanning
NOTE: If you have Device ID set to 17 on the JP and 17 on the Editor, our Editor will find and establish connection to your JP if everything else is configured properly.
